Apps → Energy & home → Shelly

Shelly on an LED panel

Live power and energy of a Shelly plug or relay (Gen2 / Plus / Pro) on your network.

No setup You need: A Shelly Gen2, Plus or Pro device on the same Wi-Fi as DataPix · About a minute

What it shows

Each value refreshes every 30 s. The view shows the Shelly icon, the name of what you follow, then each value with its title above it.

Find the device address

In the Shelly app open the device, then Settings > Device information and note its IP address. Giving it a fixed IP in your router keeps this working after restarts.

Enter in DataPix: Device address
Enter in DataPix: Name (optional)
Add it
In DataPix go to Views → Add a View → Energy & home → Shelly, fill in the form, press Test to see real values, then Add. You can also add it to any view as one value: Add a value → App stat.

Updates every 30 seconds. KWH is the total measured since the device was reset.

Value shows --

Check the IP address, that DataPix and the Shelly are on the same network, and that the device is a Gen2/Plus/Pro model.

Buy DataPix Try it in the demo All apps

Steps checked against Shelly's documentation on 2026-10-07.